Tuesday, 24 March 2020

3 Causes of Clogged Drains You Should Know

Clogged drains are one of the major problems we need to deal with in our setting. As it disrupts the flow of water and regular functions, it needs to be tackled with ease. To do that, you need to seek hydro jetting services in Whittier, CA. Even though it will solve your problem, you need to inspect the common causes of clogged drains and pipes so that you can avoid them in the future.

Here are some of the major causes of clogged drains you should know about:

1. Hair strands

Most of the drains in homes are clogged when there is an excessive amount of hair strands beneath the surface. Although a single strand would not pose a major problem, as they get accumulated, they clog the drain. If you need to seek a solution to these methods, you need to keep a check on the number of hair strands and avoid brushing your hair near the source.

2. Fat and grease

You may not be surprised to learn that fat and grease are a major source of clogging of drains. This happens when you wash utensils in the kitchen or other areas near the source. Over time, this fat and grease can form layers beneath the surface and can become a major cause of all these problems. You need to look at different ways to minimize this and go ahead.

3. Foreign objects

Last but not least, the drains are clogged because there are a lot of foreign objects present in the region. You need to keep a check on most of the common areas such as water source, materials and other areas you need to look at. If you want, you can install some additional filters or accessories over the source to ensure that you do not encounter any problems later.

If you wish to seek hydro jetting services in Whittier, you should get in touch with various plumbers.

PEX A or PEX B — Which Tubing Material Better Suits Your Piping Application


Though both PEX A and PEX B tubing are great options for repiping application and perform the same function, they do vary slightly in terms of chemical makeup and also any fitting that you could put on. PEX A can go on PEX B as they use the same fittings except for expansions which only work on PEX A. Also, PEX A  is slightly more expensive but stronger. No matter what PEX re-pipe in La Habra solution you choose for your application, it has to comply with the same standards before they can be used anywhere in the US. These standards include pressure ratings, temperature ratings, minimum bending radius, necessary pipe wall thickness, and more.

Flexibility

PEX A offers the highest flexibility and softness among all PEX types. So, it's a bit easier to work with. You might have to struggle a little bit more with PEX B to get in the support and if you think about this on a long-term project, it could be annoying. If you got a kink in your PEX A tubing, you can take a heat gun right to it and just fix it. This is a problem with PEX B as you have to cut it out and then mend it with two pieces of PEX.

Reliability

The second most obvious downside of PEX A tubing, after its expensive price, is that it has a lower bursting pressure. So, in colder temperatures, it's more likely to burst quicker than PEX B. PEX B tubing is a more reliable solution in cold conditions. Also, PEX A tubing is more likely to leach chemicals that are left over from the manufacturing process.
If you are not a fan of PEX, copper re-pipe in La Habra is also a good option. Get in touch with a piping expert to know more.